- Info Add to CartRated output (kW) 10,0Range of heating power (kW) 4.5 - 12.5Efficiency (%) 81,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 174,0CO emission (at 13% O 2 ) ≤ given in % 0,10Flue gas temperature (℃) 235,0Max log length (cm) 50Emission of dust (mg/Nm 3) 28,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 106,71The minimum active field of exhaust grilles (cm 2 )≥ 700The minimum active field of inlet grilles (cm 2 )≥ 500Glazing type lateralOpening of the doors to the leftMaterial steelWidth (cm) 77,50Height (cm) 126,10Depth (cm) 49,20External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes
- Info Add to Cart
Technical data
Nominal power (kW) 10.0Heating power range (kW) 4.5 - 12.5Thermal efficiency (%) 81.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation. YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 252.0CO emission (at 13% O 2) ≤ reported in% 0.10Exhaust gas temperature (℃) 235.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 28.0Compliance with the BImSchV 2 standard. YesEnergy efficiency ratio EEI 106.71Minimum required active area of outlet grilles (cm 2 )≥ 700Minimum required active field of inlet grilles (cm 2 )≥ 500The type of glazing is simpleOpening the door to the topMaterial SteelWidth (cm) 83.50Height (cm) 121.80Depth (cm) 49.40Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 10,0Range of heating power (kW) 4.5 - 12.5Efficiency (%) 81,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 161,0CO emission (at 13% O 2 ) ≤ given in % 0,10Flue gas temperature (℃) 235,0Max log length (cm) 50Emission of dust (mg/Nm 3) 28,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 106,71The minimum active field of exhaust grilles (cm 2 )≥ 700The minimum active field of inlet grilles (cm 2 )≥ 500Glazing type straightOpening of the doors to the leftMaterial steelWidth (cm) 70,30Height (cm) 126,10Depth (cm) 42,80External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Average power of the water (kW) 9,0Range of heating power (kW) 9.0 - 19.5Efficiency (%) 86,0The maximum operating pressure (bar) 2,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 293,0Water capacity (l) 47,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 201,0Max log length (cm) 50Emission of dust (mg/Nm 3) 8,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 113,20Glazing type lateralOpening of the doors to the rightMaterial steelWidth (cm) 91,00Height (cm) 146,00Depth (cm) 57,50External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass YesCoil Yes - Info Add to Cart
Technical data
Nominal power (kW) 17.0Average power from water (kW) 9.0Heating power range (kW) 9.0 - 19.5Thermal efficiency (%) 86.0Max working pressure (bar) 2.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation. YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 293.0Water capacity (l) 47.0CO emission (at 13% O 2) ≤ reported in% 0.09Flue gas temperature (℃) 201.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 8.0Compliance with the BImSchV 2 standard. YesEnergy efficiency ratio EEI 113.20Opening the door to the leftMaterial SteelWidth (cm) 91.00Height (cm) 146.00Depth (cm) 57.50Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane YesCoil Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Average power of the water (kW) 9,0Range of heating power (kW) 9.0 - 19.5Efficiency (%) 86,0The maximum operating pressure (bar) 2,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 414,5Water capacity (l) 47,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 201,0Max log length (cm) 50Emission of dust (mg/Nm 3) 8,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 113,20Glazing type straightOpening of the doors lift upMaterial steelWidth (cm) 96,50Height (cm) 142,90Depth (cm) 53,70External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass YesCoil Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Average power of the water (kW) 9,0Range of heating power (kW) 9.0 - 19.5Efficiency (%) 86,0The maximum operating pressure (bar) 2,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 314,5Water capacity (l) 47,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 201,0Max log length (cm) 50Emission of dust (mg/Nm 3) 8,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 113,20Glazing type straightOpening of the doors to the leftMaterial steelWidth (cm) 83,00Height (cm) 139,50Depth (cm) 47,90External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass YesCoil Yes - Info Add to Cart
Technical data
Nominal power (kW) 17.0Heating power range (kW) 8.0 - 21.0Thermal efficiency (%) 80.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation. YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 309.0CO emission (at 13% O 2) ≤ reported in% 0.09Flue gas temperature (℃) 250.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 35.0Compliance with the BImSchV 2 standard. YesEnergy EfficiencyIndexEEI 105.40Minimum required active area of outlet grilles (cm 2 )≥ 1000Minimum required active field of inlet grilles (cm 2 )≥ 800Opening the door up, to the leftMaterial SteelWidth (cm) 96.70Height (cm) 150.00Depth (cm) 59.10Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane Yes - Info Add to Cart
Technical data
Nominal power (kW) 17.0Heating power range (kW) 8.0 - 21.0Thermal efficiency (%) 80.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation. YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 309.0CO emission (at 13% O 2) ≤ reported in% 0.09Flue gas temperature (℃) 250.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 35.0Compliance with the BImSchV 2 standard. YesEnergy EfficiencyIndexEEI 105.40Minimum required active area of outlet grilles (cm 2 )≥ 1000Minimum required active field of inlet grilles (cm 2 )≥ 800Type of glazing sideOpening the door up, to the leftMaterial SteelWidth (cm) 96.70Height (cm) 150.00Depth (cm) 59.10Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 238,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type lateralOpening of the doors to the rightMaterial steelWidth (cm) 90,50Height (cm) 150,00Depth (cm) 53,70External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 238,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type lateralOpening of the doors to the rightMaterial steelWidth (cm) 90,50Height (cm) 150,00Depth (cm) 53,70External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical data
Nominal power (kW) 17.0Heating power range (kW) 8.0 - 21.0Thermal efficiency (%) 80.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation. YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 309.0CO emission (at 13% O 2) ≤ reported in% 0.09Flue gas temperature (℃) 250.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 35.0Compliance with the BImSchV 2 standard. YesEnergy EfficiencyIndexEEI 105.40Minimum required active area of outlet grilles (cm 2 )≥ 1000Minimum required active field of inlet grilles (cm 2 )≥ 800Opening the door up, rightMaterial SteelWidth (cm) 96.70Height (cm) 150.00Depth (cm) 59.10Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 309,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type lateralOpening of the doors lift up, to the rightMaterial steelWidth (cm) 96,70Height (cm) 150,00Depth (cm) 59,10External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 238,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type lateralOpening of the doors to the leftMaterial steelWidth (cm) 90,50Height (cm) 150,00Depth (cm) 53,70External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 238,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type lateralOpening of the doors to the leftMaterial steelWidth (cm) 90,50Height (cm) 150,00Depth (cm) 53,70External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 320,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type straightOpening of the doors lift upMaterial steelWidth (cm) 96,60Height (cm) 150,00Depth (cm) 51,80External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 17,0Range of heating power (kW) 8.0 - 21.0Efficiency (%) 80,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 222,0CO emission (at 13% O 2 ) ≤ given in % 0,09Flue gas temperature (℃) 250,0Max log length (cm) 50Emission of dust (mg/Nm 3) 35,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 105,40The minimum active field of exhaust grilles (cm 2 )≥ 1000The minimum active field of inlet grilles (cm 2 )≥ 800Glazing type straightOpening of the doors to the leftMaterial steelWidth (cm) 83,00Height (cm) 150,00Depth (cm) 47,50External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Technical data
Nominal power (kW) 20.0Heating power range (kW) 10.0 - 27.0Thermal efficiency (%) 80.0The diameter of the exhaust outlet (mm) 200Meets ECODESIGN criteria YesIntended for recuperation .YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 396.0CO emission (at 13% O 2) ≤ reported in% 0.10Flue gas temperature (℃) 240.0Max log length (cm) 50Pollen emission (dust) (mg / Nm 3 ) 11.0Compliance with the BImSchV 2 standard. YesEnergy EfficiencyIndexEEI 105.40Minimum required active area of outlet grilles (cm 2 )≥ 1000Minimum required active field of inlet grilles (cm 2 )≥ 800The type of glazing is simpleOpening the door to the topMaterial SteelWidth (cm) 145.40Height (cm) 136.30Depth (cm) 56.00Air intake YesCombustion chamber lining YesAsh box No.Decorative glass pane Yes - Info Add to Cart
Technical Specifications
Rated output (kW) 14,0Range of heating power (kW) 6.0 - 17.0Efficiency (%) 82,0Exhaust outlet diameter (mm) 200Complies with Ecodesign criteria YesDesigned for heat recovery unit YesFuel type recommended seasoned hardwood with moisture ≤20%Weight (kg) 327,0CO emission (at 13% O 2 ) ≤ given in % 0,10Flue gas temperature (℃) 220,0Max log length (cm) 50Emission of dust (mg/Nm 3) 27,0Compliance with BImSchV 2 standard YesThe energy efficiency index EEI 108,01The minimum active field of exhaust grilles (cm 2 )≥ 900The minimum active field of inlet grilles (cm 2 )≥ 700Glazing type straightOpening of the doors lift upMaterial steelWidth (cm) 125,40Height (cm) 129,30Depth (cm) 51,50External air inlet YesThe liner of the combustion chamber YesAshpan NoDecorative printed glass Yes - Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
COMFORTABLE USE
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.
Limitation of sooting thanks to the clean windshield system (air guide).
- Info Add to Cart
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles
The cartridge is equipped with an elegant and comfortable handle.
- Info Add to Cart
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles.
The cartridge is equipped with an elegant and comfortable handle.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
The removable grate and ash pan make it easy to keep the cartridge clean.
MODERN DESIGN
Fireplace insert with two panes aligned at right angles.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean.
- Info Add to Cart
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles (glazing joined without a muntin).
The cartridge is equipped with an elegant and comfortable handle.
- Info Add to Cart
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles.
The cartridge is equipped with an elegant and comfortable handle.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
Stable and resistant to tension door fireplace made of a closed profile. The door gasket is located in the contoured channel, which guarantees its proper adhesion and prevents it from falling out during operation.
COMFORTABLE USE
Double door opening system (GUILOT) and side. The raised and lowered doors make it easier to load wood, and the mechanism enabling lateral opening will allow more efficient cleaning of the glass.
The removable grate and ash pan make it easy to keep the cartridge clean.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
MODERN DESIGN
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean.
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
COMFORTABLE USE
Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.
A large combustion chamber that allows you to load a large amount of fuel at once, without the need for frequent refilling.
Limitation of sooting thanks to the clean windshield system (air guide).
An elegant and comfortable handle.
Possibility of leveling the insert thanks to adjustable feet.
Double door opening system (GUILOT) and side. The raised and lowered doors make it easier to load wood, and the mechanism enabling lateral opening will allow more efficient cleaning of the glass.
MODERN DESIGN
The front of the insert is made of steel designed to work at elevated temperatures.
Fireplace insert with two panes aligned at right angles
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Stable and resistant to tension door fireplace made of a closed profile. The door gasket is located in the contoured channel, which guarantees its proper adhesion and prevents it from falling out during operation.
COMFORTABLE USE
A large combustion chamber that allows you to load a large amount of fuel at once, without the need for frequent refilling.
Limitation of sooting thanks to the clean windshield system (air guide).
An elegant and comfortable handle.
Possibility of leveling the insert thanks to adjustable feet.
MODERN DESIGN
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
The front of the insert is made of steel designed to work at elevated temperatures.
Fireplace insert with two panes aligned at right angles
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
COMFORTABLE USE
Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.
A large combustion chamber that allows you to load a large amount of fuel at once, without the need for frequent refilling.
Limitation of sooting thanks to the clean windshield system (air guide).
An elegant and comfortable handle.
Possibility of leveling the insert thanks to adjustable feet.
MODERN DESIGN
The front of the insert is made of steel designed to work at elevated temperatures.
Fireplace insert with two panes aligned at right angles
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
COMFORTABLE USE
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.
Limitation of sooting thanks to the clean windshield system (air guide).
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
COMFORTABLE USE
Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.
A large combustion chamber that allows you to load a large amount of fuel at once, without the need for frequent refilling.
Limitation of sooting thanks to the clean windshield system (air guide).
An elegant and comfortable handle.
Possibility of leveling the insert thanks to adjustable feet.
Double door opening system (GUILOT) and side. The raised and lowered doors make it easier to load wood, and the mechanism enabling lateral opening will allow more efficient cleaning of the glass.
MODERN DESIGN
The front of the insert is made of steel designed to work at elevated temperatures.
Fireplace insert with two panes aligned at right angles
- Info Add to Cart
Benefits
MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Stable and resistant to tension door fireplace made of a closed profile. The door gasket is located in the contoured channel, which guarantees its proper adhesion and prevents it from falling out during operation.
COMFORTABLE USE
A large combustion chamber that allows you to load a large amount of fuel at once, without the need for frequent refilling.
Limitation of sooting thanks to the clean windshield system (air guide).
An elegant and comfortable handle.
Possibility of leveling the insert thanks to adjustable feet.
MODERN DESIGN
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
The front of the insert is made of steel designed to work at elevated temperatures.
Fireplace insert with two panes aligned at right angles