Kratki Stoves

View Cart

Details

ZUZIA 16 tunnel
16kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 16,0
Range of heating power (kW) 7.5 - 21.0
Efficiency (%) 76,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 161,0
CO emission (at 13% O 2 ) ≤ given in % 0,50
Flue gas temperature (℃) 355,0
Max log length (cm) 50
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 100,18
The minimum active field of exhaust grilles (cm² ) ≥1000
The minimum active field of inlet grilles (cm² ) ≥800
Glazing type tunnel type
Opening of the doors to the left
Material cast iron
Width (cm) 65,20
Height (cm) 81,00
Depth (cm) 44,20
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
Info Add to Cart
View Cart

Details

ZUZIA ECO 12
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
Devices from the ZUZIA ECO series are fireplace inserts with a spacious cast-iron combustion chamber, additionally equipped with densely arranged radiators from the outside. Thanks to the use of such a solution, the surface of heat emission to the environment is much larger. This increases the mass of the device itself. The insert has an afterburning system, which along with other technical solutions affects very good combustion parameters, thanks to which the device meets the strict Ecodesign requirements. SAFETY AT THE HIGHEST LEVELThe cast iron front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The attached glass has a quality and safety certificate. COMFORTABLE USE
The device is additionally equipped with a clean glass system - thanks to the so-called curtain air flow is distributed evenly, sweeps glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Keeping the cartridge clean is easier thanks to the mounted grate and the container in which ash accumulates. In addition, the insert has a removable fence, which protects the wood from falling out of the furnace and makes it easier to clean the fireplace.
MAXIMUM USE OF ENERGY
Afterburning of fuel particles is due to the deflector, which extends the exhaust path. This process also increases the efficiency of combustion and guarantees better use of energy, and thus minimizes the emission of harmful substances into the atmosphere.
The device has a triple ventilation system for the combustion chamber, thanks to which wood burning in the cartridge is ecological and most importantly economical.
The primary air is supplied to the cartridge from the outside, thanks to the built-in 125 mm air inlet connection. The air intake stub is located in the floor of the cartridge.
Secondary air is supplied through openings in the rear wall of the furnace, creating the so-called afterburner system. He is responsible for burning gases and reducing emissions of harmful substances into the environment. It increases the efficiency of the fireplace, thanks to which the device achieves very low CO emission parameters (low CO emission).
The device is equipped with a clean glass system - thanks to the so-called curtain air stream is distributed evenly, sweeps the glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Info Add to Cart
View Cart

Details

ZUZIA ECO 12 DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
Devices from the ZUZIA ECO series are fireplace inserts with a spacious cast-iron combustion chamber, additionally equipped with densely arranged radiators from the outside. Thanks to the use of such a solution, the surface of heat emission to the environment is much larger. This increases the mass of the device itself. The insert has an afterburning system, which along with other technical solutions affects very good combustion parameters, thanks to which the device meets the strict Ecodesign requirements. SAFETY AT THE HIGHEST LEVELModern front of the insert made of steel, equipped with a decorative heat-resistant ceramics withstanding temperatures up to 800 ° C. The attached glass has a quality and safety certificate. Decorative glass pane, not only looks elegant and modern, but above all, the use of this solution optically enlarges the front of the cartridge and emphasizes the vision of fire. The door frame is made of a closed profile, which makes them stable and resistant to stresses occurring during operation at high temperatures. COMFORTABLE USE
The device is additionally equipped with a clean glass system - thanks to the so-called curtain air flow is distributed evenly, sweeps glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Keeping the cartridge clean is easier thanks to the mounted grate and the container in which ash accumulates. In addition, the insert has a removable fence, which protects the wood from falling out of the furnace and makes it easier to clean the fireplace.
MAXIMUM USE OF ENERGY
Afterburning of fuel particles is due to the deflector, which extends the exhaust path. This process also increases the efficiency of combustion and guarantees better use of energy, and thus minimizes the emission of harmful substances into the atmosphere.
The device has a triple ventilation system for the combustion chamber, thanks to which wood burning in the cartridge is ecological and most importantly economical.
The primary air is supplied to the cartridge from the outside, thanks to the built-in 125 mm air inlet connection. The air intake stub is located in the floor of the cartridge.
Secondary air is supplied through openings in the rear wall of the furnace, creating the so-called afterburner system. He is responsible for burning gases and reducing emissions of harmful substances into the environment. It increases the efficiency of the fireplace, thanks to which the device achieves very low CO emission parameters (low CO emission).
The device is equipped with a clean glass system - thanks to the so-called curtain air stream is distributed evenly, sweeps the glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Info Add to Cart
View Cart

Details

ZUZIA ECO 12 lewy BS DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
Devices from the ZUZIA ECO series are fireplace inserts with a spacious cast-iron combustion chamber, additionally equipped with densely arranged radiators from the outside. Thanks to the use of such a solution, the surface of heat emission to the environment is much larger. This increases the mass of the device itself. The insert has an afterburning system, which along with other technical solutions affects very good combustion parameters, thanks to which the device meets the strict Ecodesign requirements. SAFETY AT THE HIGHEST LEVELModern front of the insert made of steel, equipped with a decorative heat-resistant ceramics withstanding temperatures up to 800 ° C. The attached glass has a quality and safety certificate. Decorative glass pane, not only looks elegant and modern, but above all, the use of this solution optically enlarges the front of the cartridge and emphasizes the vision of fire. The door frame is made of a closed profile, which makes them stable and resistant to stresses occurring during operation at high temperatures. COMFORTABLE USE
The device is additionally equipped with a clean glass system - thanks to the so-called curtain air flow is distributed evenly, sweeps glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Keeping the cartridge clean is easier thanks to the mounted grate and the container in which ash accumulates. In addition, the insert has a removable fence, which protects the wood from falling out of the furnace and makes it easier to clean the fireplace.
MAXIMUM USE OF ENERGY
Afterburning of fuel particles is due to the deflector, which extends the exhaust path. This process also increases the efficiency of combustion and guarantees better use of energy, and thus minimizes the emission of harmful substances into the atmosphere.
The device has a triple ventilation system for the combustion chamber, thanks to which wood burning in the cartridge is ecological and most importantly economical.
The primary air is supplied to the cartridge from the outside, thanks to the built-in 125 mm air inlet connection. The air intake stub is located in the floor of the cartridge.
Secondary air is supplied through openings in the rear wall of the furnace, creating the so-called afterburner system. He is responsible for burning gases and reducing emissions of harmful substances into the environment. It increases the efficiency of the fireplace, thanks to which the device achieves very low CO emission parameters (low CO emission).
The device is equipped with a clean glass system - thanks to the so-called curtain air stream is distributed evenly, sweeps the glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Info Add to Cart
View Cart

Details

ZUZIA ECO 12 prawy BS DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
Devices from the ZUZIA ECO series are fireplace inserts with a spacious cast-iron combustion chamber, additionally equipped with densely arranged radiators from the outside. Thanks to the use of such a solution, the surface of heat emission to the environment is much larger. This increases the mass of the device itself. The insert has an afterburning system, which along with other technical solutions affects very good combustion parameters, thanks to which the device meets the strict Ecodesign requirements. SAFETY AT THE HIGHEST LEVELModern front of the insert made of steel, equipped with a decorative heat-resistant ceramics withstanding temperatures up to 800 ° C. The attached glass has a quality and safety certificate. Decorative glass pane, not only looks elegant and modern, but above all, the use of this solution optically enlarges the front of the cartridge and emphasizes the vision of fire. The door frame is made of a closed profile, which makes them stable and resistant to stresses occurring during operation at high temperatures. COMFORTABLE USE
The device is additionally equipped with a clean glass system - thanks to the so-called curtain air flow is distributed evenly, sweeps glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Keeping the cartridge clean is easier thanks to the mounted grate and the container in which ash accumulates. In addition, the insert has a removable fence, which protects the wood from falling out of the furnace and makes it easier to clean the fireplace.
MAXIMUM USE OF ENERGY
Afterburning of fuel particles is due to the deflector, which extends the exhaust path. This process also increases the efficiency of combustion and guarantees better use of energy, and thus minimizes the emission of harmful substances into the atmosphere.
The device has a triple ventilation system for the combustion chamber, thanks to which wood burning in the cartridge is ecological and most importantly economical.
The primary air is supplied to the cartridge from the outside, thanks to the built-in 125 mm air inlet connection. The air intake stub is located in the floor of the cartridge.
Secondary air is supplied through openings in the rear wall of the furnace, creating the so-called afterburner system. He is responsible for burning gases and reducing emissions of harmful substances into the environment. It increases the efficiency of the fireplace, thanks to which the device achieves very low CO emission parameters (low CO emission).
The device is equipped with a clean glass system - thanks to the so-called curtain air stream is distributed evenly, sweeps the glass and minimizes the deposition of soot on it. This allows you to maintain the effective and clean look of the glass for a long time.
Info Add to Cart
View Cart

Details

ZUZIA PW 15
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean
Info Add to Cart
View Cart

Details

ZUZIA PW 15
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical data
Nominal power (kW) 12.0
Average power from water (kW) 8.0
Heating power range (kW) 5.0 - 15.0
Thermal efficiency (%) 81.0
Max working pressure (bar) 2.0
The diameter of the exhaust outlet (mm) 200
Meets ECODESIGN criteria Yes
Intended for recuperation. No.
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 160.0
Water capacity (l) 38.0
CO emission (at 13% O 2) ≤ reported in %0.09
Flue gas temperature (℃) 255,0
Max log length (cm) 50
Pollen emission (dust) (mg / Nm ³ ) 33.0
Compliance with the BImSchV 2 standard. Yes
Energy EfficiencyIndexEEI 106.70
The type of glazing is simple
Opening the door to the left
Material of work: steel, cast iron
Width (cm) 65.20
Height (cm) 86.90
Depth (cm) 49.60
Air intake No.
Lining the combustion chamber No.
Ash box Yes
Decorative glass pane No.
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 15 DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean.
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
Info Add to Cart
View Cart

Details

ZUZIA PW 15 guillotine
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
235.0
Water capacity (l)38.0
CO emission (at 13% O 2) ≤ reported in%0.09
Flue gas temperature (℃)255,0
Max log length (cm)50
Pollen emission (dust) (mg / Nm ³ )33.0
Compliance with the BImSchV 2 standard.Yes
Energy EfficiencyIndexEEI106.70
The type of glazing issimple
Opening the doorup
Material of work:steel, cast iron
Width (cm)81.80
Height (cm)114.40
Depth (cm)54.90
Air intakeNo.
Lining the combustion chamberNo.
Ash boxYes
Decorative glass paneYes
CoilYes
Info Add to Cart
View Cart

Details

ZUZIA PW 15 left
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 12,0
Average power of the water (kW) 8,0
Range of heating power (kW) 5.0 - 15.0
Efficiency (%) 81,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria Yes
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 170,0
Water capacity (l) 38,0
CO emission (at 13% O 2 ) ≤ given in % 0,09
Flue gas temperature (℃) 255,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 33,0
Compliance with BImSchV 2 standard Yes
The energy efficiency index EEI 106,70
Glazing type lateral
Opening of the doors to the left
Material steel, cast iron
Width (cm) 66,40
Height (cm) 86,80
Depth (cm) 49,60
External air inlet No
The liner of the combustion chamber No
AshpanYes
Decorative printed glass No
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 15 left BS DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 12,0
Average power of the water (kW) 8,0
Range of heating power (kW) 5.0 - 15.0
Efficiency (%) 81,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria Yes
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 193,0
Water capacity (l) 38,0
CO emission (at 13% O 2 ) ≤ given in %0,09
Flue gas temperature (℃) 255,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 33,0
Compliance with BImSchV 2 standard Yes
The energy efficiency index EEI 106,70
Glazing type lateral
Opening of the doors to the left
Material steel, cast iron
Width (cm)70,40
Height (cm) 99,30
Depth (cm) 49,10
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass Yes
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 15 lewy BS
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
The removable grate and ash pan make it easy to keep the cartridge clean.
MODERN DESIGN
Fireplace insert with two panes aligned at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 15 prawy BS
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
The removable grate and ash pan make it easy to keep the cartridge clean.
MODERN DESIGN
Fireplace insert with two panes aligned at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 15 right
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 12,0
Average power of the water (kW) 8,0
Range of heating power (kW) 5.0 - 15.0
Efficiency (%) 81,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria Yes
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 170,0
Water capacity (l) 38,0
CO emission (at 13% O 2 ) ≤ given in % 0,09
Flue gas temperature (℃) 255,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 33,0
Compliance with BImSchV 2 standard Yes
The energy efficiency index EEI 106,70
Glazing type lateral
Opening of the doors to the left
Material steel, cast iron
Width (cm) 66,40
Height (cm) 86,80
Depth (cm) 49,10
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
CoilYes
Info Add to Cart
View Cart

Details

ZUZIA PW 15 right BS DECO
12kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 12,0
Average power of the water (kW) 8,0
Range of heating power (kW) 5.0 - 15.0
Efficiency (%) 81,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria Yes
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 193,0
Water capacity (l) 38,0
CO emission (at 13% O 2 ) ≤ given in % 0,09
Flue gas temperature (℃) 255,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 33,0
Compliance with BImSchV 2 standard Yes
The energy efficiency index EEI 106,70
Glazing type lateral
Opening of the doors to the right
Material steel, cast iron
Width (cm) 70,40
Height (cm) 99,30
Depth (cm) 49,10
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass Yes
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 19
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 19,0
Average power of the water (kW) 15,0
Range of heating power (kW) 10.0 - 24.0
Efficiency (%) 75,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 166,0
Water capacity (l) 40,5
CO emission (at 13% O 2 ) ≤ given in % 0,26
Flue gas temperature (℃) 295,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 79,8
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 98,88
Glazing type straight
Opening of the doors to the left
Material steel, cast iron
Width (cm) 65,20
Height (cm) 86,90
Depth (cm) 49,10
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 19 DECO
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.
The removable grate and ash pan make it easy to keep the cartridge clean.
Decorative glass pane withstanding temperature up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the cartridge.
Info Add to Cart
View Cart

Details

ZUZIA PW 19 guillotine
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 19,0
Average power of the water (kW) 15,0
Range of heating power (kW) 10.0 - 24.0
Efficiency (%) 75,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 241,0
Water capacity (l) 40,5
CO emission (at 13% O 2 ) ≤ given in % 0,26
Flue gas temperature (℃) 295,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 79,8
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 98,88
Glazing type straight
Opening of the doors lift up
Material steel, cast iron
Width (cm) 81,80
Height (cm) 114,40
Depth (cm) 54,90
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass Yes
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 19 left
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 19,0
Average power of the water (kW) 15,0
Range of heating power (kW) 10.0 - 24.0
Efficiency (%) 75,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 177,0
Water capacity (l) 40,5
CO emission (at 13% O 2 ) ≤ given in % 0,26
Flue gas temperature (℃) 295,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 79,8
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 98,88
Glazing type lateral
Opening of the doors to the left
Material steel, cast iron
Width (cm) 66,40
Height (cm) 86,80
Depth (cm) 49,60
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 19 lewy BS
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
The removable grate and ash pan make it easy to keep the cartridge clean.
MODERN DESIGN
Fireplace insert with two panes aligned at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 19 lewy BS DECO
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.
Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 19 prawy BS
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in the noble gas shield.
Steel elements are laser cut using modern devices and then bent on CNC bending machines.
Overheating protection by means of a built-in coil - 1/2 "input / output connector.
COMFORTABLE USE
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.
The removable grate and ash pan make it easy to keep the cartridge clean.
MODERN DESIGN
Fireplace insert with two panes aligned at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 19 prawy BS DECO
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Benefits
When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.
Manual control over the combustion process of air drawn from the room through the ash box.
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.
The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).
Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.
Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.
COMFORT OF USE
The removable grate and ash pan make it easy to keep the cartridge clean.
The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).
The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.
MODERN DESIGN
A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system
The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.
Decorative glass panes are set at right angles
Info Add to Cart
View Cart

Details

ZUZIA PW 19 right
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 19,0
Average power of the water (kW) 15,0
Range of heating power (kW) 10.0 - 24.0
Efficiency (%) 75,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 200
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 177,0
Water capacity (l) 40,5
CO emission (at 13% O 2 ) ≤ given in % 0,26
Flue gas temperature (℃) 295,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 79,8
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 98,88
Glazing type lateral
Opening of the doors to the left
Material steel, cast iron
Width (cm) 66,40
Height (cm) 86,80
Depth (cm) 49,60
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
Coil Yes
Info Add to Cart
View Cart

Details

ZUZIA PW 19 Tunnel Double Sided Inset Boiler
19kW

€ 0.00 exc VAT
(0.00 inc VAT)
Technical Specifications
Rated output (kW) 19,0
Average power of the water (kW) 11,5
Range of heating power (kW) 10.0 - 24.0
Efficiency (%) 75,0
The maximum operating pressure (bar) 2,0
Exhaust outlet diameter (mm) 180
Complies with Ecodesign criteria No
Designed for heat recovery unit No
Fuel type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 163,0
Water capacity (l) 25,0
CO emission (at 13% O 2 ) ≤ given in % 0,26
Flue gas temperature (℃) 301,0
Max log length (cm) 50
Emission of dust (mg/Nm³) 79,8
Compliance with BImSchV 2 standard No
The energy efficiency index EEI 98,88
Glazing type tunnel type
Opening of the doors to the left
Material steel, cast iron
Width (cm) 65,20
Height (cm) 74,20
Depth (cm) 44,30
External air inlet No
The liner of the combustion chamber No
Ashpan Yes
Decorative printed glass No
CoilYes
Info Add to Cart