Kratki Stoves

Home/Woodburning/Kratki Stoves
  • MAJA PW 12 lewy BS DECO

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.

    Manual control over the combustion process of air drawn from the room through the ash box.

    SAFETY AT THE HIGHEST LEVEL

    The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.

    The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).

    Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.

    Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.

    COMFORT OF USE

    The removable grate and ash pan make it easy to keep the cartridge clean.

    The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).

    The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.

    MODERN DESIGN

    A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system

    The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.

    Decorative glass panes are set at right angles.

    The cartridge is equipped with an elegant and comfortable handle.

    Info Add to Cart
  • MAJA PW 12 prawy

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.

    SAFETY AT THE HIGHEST LEVEL

    Excellent tightness thanks to solid welds made in the noble gas shield.

    Steel elements are laser cut using modern devices and then bent on CNC bending machines.

    Overheating protection by means of a built-in coil - 1/2 "input / output connector.

    COMFORTABLE USE

    The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.

    Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.

    An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.

    The removable grate and ash pan make it easy to keep the cartridge clean.

    Info Add to Cart
  • MAJA PW 12 prawy BS

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    MAXIMUM USE OF ENERGYBody and front of the cartridge resistant to high temperatures due to the material used - high-grade steel.Built-in flame tubes and a high chopper that increase the heat exchange surface.Increased heat exchange surface thanks to built-in flames and a high flue.Adjusting the air draft using the built-in window.Manual control over the combustion process of air drawn from the room through the ash box.

    SAFETY AT THE HIGHEST LEVEL

    Excellent tightness thanks to solid welds made in the noble gas shield.

    Steel elements are laser cut using modern devices and then bent on CNC bending machines.

    Overheating protection by means of a built-in coil - 1/2 "input / output connector.

    COMFORTABLE USE

    The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.

    The removable grate and ash pan make it easy to keep the cartridge clean.

    MODERN DESIGN

    Fireplace insert with two panes aligned at right angles.

    Info Add to Cart
  • MAJA PW 12 prawy BS DECO

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.

    Manual control over the combustion process of air drawn from the room through the ash box.

    SAFETY AT THE HIGHEST LEVEL

    The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.

    The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).

    Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.

    Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.

    COMFORT OF USE

    The removable grate and ash pan make it easy to keep the cartridge clean.

    The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).

    The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.

    MODERN DESIGN

    A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system

    The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.

    Decorative glass panes are set at right angles.

    The cartridge is equipped with an elegant and comfortable handle.

    Info Add to Cart
  • MAJA PW 12 right BS DECO

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    When installing a fireplace with a water jacket, we do not need to carry out a separate installation, which is because we can use the existing one. MAXIMUM USE OF ENERGYIn the fireplace with a water jacket, the furnace body has double walls. The space between them is filled with water that receives heat and transfers it to the heating installation.Increased heat exchange surface in the cartridge is due to built-in flames and a high flue.The regulation of the air draft takes place by means of a built-in window.

    Manual control over the combustion process of air drawn from the room through the ash box.

    SAFETY AT THE HIGHEST LEVEL

    The front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C. The glass we offer is certified for quality and safety.

    The coil installed in the cartridge serves to protect the fireplace from overheating (1/2 "input / output connector).

    Body and front of the cartridge resistant to high temperatures due to the use of high-quality steel.

    Excellent tightness thanks to solid welds made in the noble gas shield. Steel elements are laser cut using modern devices and then bent on CNC bending machines.

    COMFORT OF USE

    The removable grate and ash pan make it easy to keep the cartridge clean.

    The air curtain separates the glass from the firebox. Thanks to this, the glass does not get dirty and gives more heat to the room. Limited sooting thanks to the clean glass system (air guide).

    The possibility of leveling the unevenness of the substrate and leveling the insert thanks to the adjustable legs.

    MODERN DESIGN

    A built-in contribution with a water unit does not differ in appearance from a typical air contribution. It only widens the advantages of the latter with the possibility of connecting the fireplace to the central heating system

    The cartridge is equipped with a decorative, single glass, thanks to which it looks elegant and modern. In addition, the use of this solution visually enlarges the front of the cartridge.

    Decorative glass panes are set at right angles 

    The cartridge is equipped with an elegant and comfortable handle.

    Info Add to Cart
  • MAJA/LP MAJA 8 lewy / prawy

    8kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Benefits

    MAXIMUM USE OF ENERGYMaximum use of heat thanks to the densely placed heat sinks and the walls of the furnace made of high quality cast iron, 8 mm thick.Increased heat exchange area between hot exhaust gases and the room due to a high smoke conduit.Burning fuel particles thanks to a deflector that extends the exhaust path.Increased work efficiency of the cartridge by manual regulation of chimney draft using the built-in window.Manual control over the combustion process carried out by shifting the ash pan.

    SAFETY AT THE HIGHEST LEVEL

    The classic front of the insert is equipped with heat-resistant ceramics that withstand temperatures up to 800 ° C.

    An ornate fence facilitates maintaining cleanliness of use and protects against falling out of wood.

    COMFORTABLE USE

    Cold door handle system that reduces the risk of burns, thanks to the possibility of removing it while smoking.

    Ash drawer / container, in which residues from burnt wood accumulate and a movable grate facilitating the removal of ash.

    Limitation of sooting thanks to the clean windshield system (air guide).

    Info Add to Cart
  • MB 100 guillotine

    14kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 14,0
    Range of heating power (kW) 6.0 - 17.0
    Efficiency (%) 82,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 327,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 220,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 327,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 108,01
    The minimum active field of exhaust grilles (cm 2 )≥ 900
    The minimum active field of inlet grilles (cm 2 )≥ 700
    Glazing type straight
    Opening of the doors lift up
    Material steel
    Width (cm) 125,40
    Height (cm) 129,30
    Depth (cm) 51,50
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MB 120 guillotine

    20kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 20.0
    Heating power range (kW) 10.0 - 27.0
    Thermal efficiency (%) 80.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation .Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 396.0
    CO emission (at 13% O 2) ≤ reported in% 0.10
    Flue gas temperature (℃) 240.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 11.0
    Compliance with the BImSchV 2 standard. Yes
    Energy EfficiencyIndexEEI 105.40
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 1000
    Minimum required active field of inlet grilles (cm 2 )≥ 800
    The type of glazing is simple
    Opening the door to the top
    Material Steel
    Width (cm) 145.40
    Height (cm) 136.30
    Depth (cm) 56.00
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBA 17

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 222,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type straight
    Opening of the doors to the left
    Material steel
    Width (cm) 83,00
    Height (cm) 150,00
    Depth (cm) 47,50
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 guillotine

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 320,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type straight
    Opening of the doors lift up
    Material steel
    Width (cm) 96,60
    Height (cm) 150,00
    Depth (cm) 51,80
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 left BS

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 238,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type lateral
    Opening of the doors to the left
    Material steel
    Width (cm) 90,50
    Height (cm) 150,00
    Depth (cm) 53,70
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 left BS bent glass

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 238,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type lateral
    Opening of the doors to the left
    Material steel
    Width (cm) 90,50
    Height (cm) 150,00
    Depth (cm) 53,70
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 left BS guillotine

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 309,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type lateral
    Opening of the doors lift up, to the right
    Material steel
    Width (cm) 96,70
    Height (cm) 150,00
    Depth (cm) 59,10
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 left BS guillotine bent glass

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 17.0
    Heating power range (kW) 8.0 - 21.0
    Thermal efficiency (%) 80.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 309.0
    CO emission (at 13% O 2) ≤ reported in% 0.09
    Flue gas temperature (℃) 250.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 35.0
    Compliance with the BImSchV 2 standard. Yes
    Energy EfficiencyIndexEEI 105.40
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 1000
    Minimum required active field of inlet grilles (cm 2 )≥ 800
    Opening the door up, right
    Material Steel
    Width (cm) 96.70
    Height (cm) 150.00
    Depth (cm) 59.10
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBA 17 right BS

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 238,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type lateral
    Opening of the doors to the right
    Material steel
    Width (cm) 90,50
    Height (cm) 150,00
    Depth (cm) 53,70
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 right BS bent glass

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Range of heating power (kW) 8.0 - 21.0
    Efficiency (%) 80,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 238,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 250,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 335,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 105,40
    The minimum active field of exhaust grilles (cm 2 )≥ 1000
    The minimum active field of inlet grilles (cm 2 )≥ 800
    Glazing type lateral
    Opening of the doors to the right
    Material steel
    Width (cm) 90,50
    Height (cm) 150,00
    Depth (cm) 53,70
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBA 17 right BS guillotine

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 17.0
    Heating power range (kW) 8.0 - 21.0
    Thermal efficiency (%) 80.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 309.0
    CO emission (at 13% O 2) ≤ reported in% 0.09
    Flue gas temperature (℃) 250.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 35.0
    Compliance with the BImSchV 2 standard. Yes
    Energy EfficiencyIndexEEI 105.40
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 1000
    Minimum required active field of inlet grilles (cm 2 )≥ 800
    Type of glazing side 
    Opening the door up, to the left
    Material Steel
    Width (cm) 96.70
    Height (cm) 150.00
    Depth (cm) 59.10
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBA 17 right BS guillotine glass bent

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 17.0
    Heating power range (kW) 8.0 - 21.0
    Thermal efficiency (%) 80.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 309.0
    CO emission (at 13% O 2) ≤ reported in% 0.09
    Flue gas temperature (℃) 250.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 35.0
    Compliance with the BImSchV 2 standard. Yes
    Energy EfficiencyIndexEEI 105.40
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 1000
    Minimum required active field of inlet grilles (cm 2 )≥ 800
    Opening the door up, to the left
    Material Steel
    Width (cm) 96.70
    Height (cm) 150.00
    Depth (cm) 59.10
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBA PW 17

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Average power of the water (kW) 9,0
    Range of heating power (kW) 9.0 - 19.5
    Efficiency (%) 86,0
    The maximum operating pressure (bar) 2,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 314,5
    Water capacity (l) 47,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 201,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 38,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 113,20
    Glazing type straight
    Opening of the doors to the left
    Material steel
    Width (cm) 83,00
    Height (cm) 139,50
    Depth (cm) 47,90
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Coil Yes
    Info Add to Cart
  • MBA PW 17 guillotine

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Average power of the water (kW) 9,0
    Range of heating power (kW) 9.0 - 19.5
    Efficiency (%) 86,0
    The maximum operating pressure (bar) 2,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 414,5
    Water capacity (l) 47,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 201,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 38,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 113,20
    Glazing type straight
    Opening of the doors lift up
    Material steel
    Width (cm) 96,50
    Height (cm) 142,90
    Depth (cm) 53,70
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Coil Yes
    Info Add to Cart
  • MBA PW 17 left BS

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 17.0
    Average power from water (kW) 9.0
    Heating power range (kW) 9.0 - 19.5
    Thermal efficiency (%) 86.0
    Max working pressure (bar) 2.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 293.0
    Water capacity (l) 47.0
    CO emission (at 13% O 2) ≤ reported in% 0.09
    Flue gas temperature (℃) 201.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 8.0
    Compliance with the BImSchV 2 standard. Yes
    Energy efficiency ratio EEI 113.20
    Opening the door to the left
    Material Steel
    Width (cm) 91.00
    Height (cm) 146.00
    Depth (cm) 57.50
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Coil Yes
    Info Add to Cart
  • MBA PW 17 right BS

    17kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 17,0
    Average power of the water (kW) 9,0
    Range of heating power (kW) 9.0 - 19.5
    Efficiency (%) 86,0
    The maximum operating pressure (bar) 2,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 293,0
    Water capacity (l) 47,0
    CO emission (at 13% O 2 ) ≤ given in % 0,09
    Flue gas temperature (℃) 201,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 38,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 113,20
    Glazing type lateral
    Opening of the doors to the right
    Material steel
    Width (cm) 91,00
    Height (cm) 146,00
    Depth (cm) 57,50
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Coil Yes
    Info Add to Cart
  • MBM 10

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 161,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type straight
    Opening of the doors to the left
    Material steel
    Width (cm) 70,30
    Height (cm) 126,10
    Depth (cm) 42,80
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 guillotine

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 10.0
    Heating power range (kW) 4.5 - 12.5
    Thermal efficiency (%) 81.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 252.0
    CO emission (at 13% O 2) ≤ reported in% 0.10
    Exhaust gas temperature (℃) 235.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 28.0
    Compliance with the BImSchV 2 standard. Yes
    Energy efficiency ratio EEI 106.71
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 700
    Minimum required active field of inlet grilles (cm 2 )≥ 500
    The type of glazing is simple
    Opening the door to the top
    Material Steel
    Width (cm) 83.50
    Height (cm) 121.80
    Depth (cm) 49.40
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBM 10 left BS

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 174,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors to the left
    Material steel
    Width (cm) 77,50
    Height (cm) 126,10
    Depth (cm) 49,20
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 left BS bent glass

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 174,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors to the left
    Material steel
    Width (cm) 77,50
    Height (cm) 126,10
    Depth (cm) 49,20
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 left BS guillotine

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 244,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors lift up, to the right
    Material steel
    Width (cm) 83,70
    Height (cm) 126,90
    Depth (cm) 54,60
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 left BS guillotine bent glass

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 244,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors lift up, to the right
    Material steel
    Width (cm) 83,70
    Height (cm) 126,90
    Depth (cm) 54,60
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 right BS

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 174,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors to the right
    Material steel
    Width (cm) 77,50
    Height (cm) 126,10
    Depth (cm) 49,20
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 right BS bent glass

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 174,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors to the right
    Material steel
    Width (cm) 77,50
    Height (cm) 126,10
    Depth (cm) 49,20
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 right BS guillotine

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 10,0
    Range of heating power (kW) 4.5 - 12.5
    Efficiency (%) 81,0
    Exhaust outlet diameter (mm) 200
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 244,0
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 235,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 328,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 106,71
    The minimum active field of exhaust grilles (cm 2 )≥ 700
    The minimum active field of inlet grilles (cm 2 )≥ 500
    Glazing type lateral
    Opening of the doors lift up, to the left
    Material steel
    Width (cm) 83,70
    Height (cm) 126,90
    Depth (cm) 54,60
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Info Add to Cart
  • MBM 10 right BS guillotine bent glass

    10kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 10.0
    Heating power range (kW) 4.5 - 12.5
    Thermal efficiency (%) 81.0
    The diameter of the exhaust outlet (mm) 200
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 244.0
    CO emission (at 13% O 2) ≤ reported in% 0.10
    Exhaust gas temperature (℃) 235.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 28.0
    Compliance with the BImSchV 2 standard. Yes
    Energy efficiency ratio EEI 106.71
    Minimum required active area of ​​outlet grilles (cm 2 )≥ 700
    Minimum required active field of inlet grilles (cm 2 )≥ 500
    Type of glazing Side
    Opening the door up, to the left
    Material Steel
    Width (cm) 83.70
    Height (cm) 126.90
    Depth (cm) 54.60
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Info Add to Cart
  • MBM PW 10

    12kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 12,0
    Average power of the water (kW) 7,0
    Range of heating power (kW) 5.0 - 14.0
    Efficiency (%) 85,0
    The maximum operating pressure (bar) 2,0
    Exhaust outlet diameter (mm) 180
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 232,0
    Water capacity (l) 26,5
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 185,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 327,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 111,90
    Glazing type straight
    Opening of the doors to the left
    Material steel
    Width (cm) 70,30
    Height (cm) 122,00
    Depth (cm) 43,40
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Coil Yes
    Info Add to Cart
  • MBM PW 10 guillotine

    12kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical Specifications

    Rated output (kW) 12,0
    Average power of the water (kW) 7,0
    Range of heating power (kW) 5.0 - 14.0
    Efficiency (%) 85,0
    The maximum operating pressure (bar) 2,0
    Exhaust outlet diameter (mm) 180
    Complies with Ecodesign criteria Yes
    Designed for heat recovery unit Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 315,0
    Water capacity (l) 26,5
    CO emission (at 13% O 2 ) ≤ given in % 0,10
    Flue gas temperature (℃) 185,0
    Max log length (cm) 50
    Emission of dust (mg/Nm 327,0
    Compliance with BImSchV 2 standard Yes
    The energy efficiency index EEI 111,90
    Glazing type straight
    Opening of the doors lift up
    Material steel
    Width (cm) 83,50
    Height (cm) 122,00
    Depth (cm) 49,10
    External air inlet Yes
    The liner of the combustion chamber Yes
    Ashpan No
    Decorative printed glass Yes
    Coil Yes
    Info Add to Cart
  • MBM PW 10 left BS

    12kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 12.0
    Average power from water (kW) 7.0
    Heating power range (kW) 5.0 - 14.0
    Thermal efficiency (%) 85.0
    Max working pressure (bar) 2.0
    The diameter of the exhaust outlet (mm) 180
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 208.5
    Water capacity (I) 27.0
    CO emission (at 13% O 2) ≤ reported in% 0.10
    Exhaust gas temperature (℃) 185.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 27.0
    Compliance with the BImSchV 2 standard. Yes
    Energy efficiency ratio EEI 111,90
    Type of glazing Side
    Opening the door to the left
    Material Steel
    Width (cm) 78.00
    Height (cm) 122.00
    Depth (cm) 53.00
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Coil Yes
    Info Add to Cart
  • MBM PW 10 right BS

    12kW
    € 0.00 exc VAT
    (0.00 inc VAT)

    Technical data

    Nominal power (kW) 12.0
    Average power from water (kW) 7.0
    Heating power range (kW) 5.0 - 14.0
    Thermal efficiency (%) 85.0
    Max working pressure (bar) 2.0
    The diameter of the exhaust outlet (mm) 180
    Meets ECODESIGN criteria Yes
    Intended for recuperation. Yes
    Fuel type recommended seasoned hardwood with moisture ≤20%
    Weight (kg) 208.5
    Water capacity (I) 27.0
    CO emission (at 13% O 2) ≤ reported in% 0.10
    Exhaust gas temperature (℃) 185.0
    Max log length (cm) 50
    Pollen emission (dust) (mg / Nm 3 ) 27.0
    Compliance with the BImSchV 2 standard. Yes
    Energy efficiency ratio EEI 111,90
    Type of glazing Side
    Opening the door to the right
    Material Steel
    Width (cm) 78.00
    Height (cm) 122.00
    Depth (cm) 53.00
    Air intake Yes
    Combustion chamber lining Yes
    Ash box No.
    Decorative glass pane Yes
    Coil Yes
    Info Add to Cart